Why Choose Paragon Geyser?
THERMALLY INSULATED
PARAGON Multi-Function Geysers have complete engineering plastic long-life body which is totally rust-proof, shock-proof and resistant to scaling in hot water.
(Read more)
Even the inner storage container of all ‘paragon’ geysers is made of food grade strong engineering polymer which can stand a temperature of more than 110°C. It is non-conductive, non-corrosive, non-scaling and heat-resistant. These features make it energy saver, light weight and being food grade the water heated in it is safe for human consumption, a good reason to use it for drinking or for cooking in kitchens.
MULTI-FUNCTION: - INSTANT STORAGE PORTABLE
Can be used both as an Instant Geyser or a Storage Geyseras per your requirements. And can also be used as Portable Geyser without the hassle of fittings (for 2.5ltrs and 1.5ltrs capacity models).
(Read more)
PARAGON geysers can be connected to any tap with the flexible rubber union and pipe to work as a Portable Geyser with its unique hanging system (for 2.5ltrs and 1.5ltrs capacity models). These deliver continuously running hot water as an Instant Geyser. If the inlet and outlet pipes are connected to the angle valves fittings, these assume the function of a Storage Geyser for delivering hot water directly in the taps, mixers, showers, wash-basins or sinks round the clock and that too at a very nominal cost and being thermally insulated keeps the stored water hot for long durations.
LOW COST & ECONOMICAL
Its initial cost is very low as compared to a storage geyser and its running cost is also very low.
(Read more)
PARAGON geysers are very economical in initial price as well as in running cost because:
As polymers are bad conductors of heat and also the combination of inner storage polymer tank and outer polymer body with air gap in-between works like a thermos flask resulting in minimum heat loss and thus saves lot of electricity compared to metallic tank geysers.
Its initial cost is very low as compared to a storage geyser and the customer can install it by himself, thus saving the labour cost of a plumber or electrician.
Price of PARAGON Multi-Function geyser is just a fraction of cost of a storage geyser and its running cost is also very less than storage geysers when compared over a period of usage time.
Most parts being made of engineering plastic are low in cost and very durable in comparison to copper or brass and the spares are available at a very low price and can be replaced very easily.
It is the best option to save time and energy as it works on the principle of maximum heat-transfer* and hence delivers hot water very quickly. Moreover electricity is used only for heating the required quantity of water at any time unlike a storage geyser wherein complete stored quantity of water has to be heated up to get even a small quantity of hot water.
Heat always flows from a medium at higher temperature to the one at lower temperature and the rate of flow of heat depends on the temperature difference between the two mediums. For example, hot tea in a cup cools very fast during winter and stays hot for a long time in summer. Although the tea is at the same temperature in winter or summer, the ambient temperature is very less in winter and very high in summer. Thus the temperature difference between the hot tea and the ambient atmosphere is higher in winter and lower in summer. Consequently, heat from the hot cup of tea flows at a faster rate into the atmosphere in winter whereas it flows very slowly in summer. Thus the cup of tea cools faster in winter and stays hot longer in summer.
The same principle works in Instant geysers as compared to storage geysers. In a storage geyser we heat the stored quantity of water and as the temperature of stored water goes on increasing the temperature difference between the heating element and the water in the geyser goes on reducing gradually and hence the heat transferred to the water goes on reducing gradually as the time progresses. But in an instant geyser, the temperature difference between the heating element and water in the geyser is always maximum because as the water gets heated in the Instant Geyser, it keeps on flowing out of the geyser and fresh cold water keeps coming in its place. So the heat transfer in an Instant Geyser is always optimum and hence the cold water in it draws heat from the heating element at a faster rate. Consequently, it takes lesser time and energy to heat the same quantity of water in an instant geyser as compared to a storage geyser. Hence an instant geyser is the fastest and cheapest way of heating water as compared to heating water in a storage geyser or in a pot on a gas or kerosene stove or with firewood because in all these modes stored water when heated takes longer time to heat than continuously flowing hot water in the instant geyser.
It is almost 2-3 times economical to use a PARAGON Multi-Function geyser as compared to a Storage Geyser for day-to-day household hot water needs.
COMFORTABLE AND COSY
In view of compact size of PARAGON geysers, most people generally feel that these are suitable only for use in the kitchens and not for bathing purpose in the bathrooms. But interestingly, it has been observed that it is more suitable and comfortable for hot bath than any bigger capacity storage geyser.
(Read more)
In a storage geyser as the hot water is drawn for bath, the cold water goes on mixing with the stored hot water and its temperature goes on falling gradually and towards the end of the bath only lukewarm water comes out of the geyser which makes the bath uncomfortable whereas with PARAGON geyser the temperature of the hot water goes on increasing as the bath progresses because hot water goes on mixing with the warm water stored in the bucket continuously thereby gradually increasing the temperature of water in the bucket as the quantity of water goes on reducing and towards the end of the bath as the quantity of warm water in the bucket remains very less it gets even hotter as the continuously running hot water from the geyser mixes with it, thus making the bath more cosy towards the end.
SUITABLE EVEN FOR HARD WATER
PARAGON Geysers with polymer inner tanks work trouble free even with hard water conditions as polymers are resistant to scale formation.
(Read more)
PARAGON geyser can work better than other metallic container geysers at places where water is hard or contains salts and minerals. Scale formation is substantially reduced due to use of polymer inner container as compared to metallic container and pipes because metals catch more salts while plastic is resistant to scale formation. Even scale deposits on the metallic heating element of ‘paragon’ geyser is less as compared to storage geysers because scaling occurs more when stagnant/stored water is heated as in a storage geyser while in the PARAGON geyser as the hot water keeps on flowing out continuously and cold water keeps coming in its place, there is not enough time left for scale formation as the hot water does not remain stagnant in it.
Thus there is less scale formation on heating element in PARAGON geyser compared to storage geysers and hence the heating efficiency of the element does not reduce in PARAGON geysers over the years of usage and the life of heating element is also increased. Hence all PARAGON geysers are most suitable for places where water contains heavy salts or chemicals.
PORTABLE AND LIGHT WEIGHT
Each PARAGON multi-function geyser is light in weight but very strong and tough.
(Read more)
It has a unique hanging system due to which in spite of being fixed at one location it can be moved easily to another location where need for hot water arises (for 2.5ltrs and 1.5ltrs capacity models).
Persons on the move can also carry the PARAGON geyser and use it at any place where hot water supply is required for bathing, cooking and for preparing tea or coffee etc. instantly (for 2.5ltrs and 1.5ltrs capacity models).